- While the
cutting techniques of the ancient pyramid builders have been a
continuing topic for debate, they have not received the same attention
and controversy as the proposed methods that were used to lift and
transport huge cyclopean blocks of stone. While Egyptologists and
orthodox believers in primitive methods argue that the huge blocks
were moved and put into place using only man power, experts in moving
heavy weights using modern cranes throw doubt on the subject.
-
- My company recently installed a hydraulic press that
weighed 65 tons. In order to lift it and drop it through the roof,
they had to bring in a special crane. The crane was brought to the
site in pieces and was transported from 80 miles away over a period of
five days. After 15 semi-trailer loads, the crane was finally
assembled and ready for use.
-
- As the press was lowered into its specially prepared
pit, I asked one of the riggers about the heaviest weight he had
lifted. He claimed that it was a 110-ton nuclear power plant vessel.
When I related to him the 70 and 200 ton weights of the blocks of
stone used inside the Great Pyramid and the Valley Temple, he
expressed amazement and disbelief at the primitive methods that are
promoted by Egyptologists.
-
- For many, it is enough just to argue the
issue from a logical standpoint. For others, the subject becomes more
meaningful when a proposed method is demonstrated and proven to be
successful. There is only one man in the world who, by demonstration,
has supported the claim, I know the secret of how the pyramids of
Egypt were built! The man is now deceased.
-
- The claim was made by an eccentric Latvian recluse
named Edward Leedskalnin. An immigrant to the United States of
America, Leedskalnin devised a means to single-handedly lift and
maneuver blocks of coral weighing up to 30 tons each. In Homestead,
Florida, using his closely guarded secret, he was able to quarry and
construct an entire complex of monolithic blocks of coral in an
arrangement that reflected his own unique character. On average, the
weight of a single block used in the Coral Castle was greater than
those used to build the Great Pyramid. He labored for 28 years to
complete the work, which consisted of a total of 1,100 tons of rock.
What was Leedskalnin's secret? Is it possible for a five-foot tall,
110 pound man to accomplish such a feat without knowing techniques
that are uncommon to our contemporary understanding of physics and
mechanics?
-
- Leedskalnin was a student of the universe. Within
his castle walls, built of coral blocks weighing approximately 15 tons
each, he had a 22-ton obelisk, a 22-ton moon block, a 23-ton Jupiter
block, a Saturn block, a 9-ton gate, a rocking chair that weighed
3-tons, and numerous puzzles. A huge 30-ton block, which he considered
to be his major achievement, he crowned with a gable shaped rock.
These personal accomplishments have astounded and surprised many
engineers and technologists, who compare them with those achieved by
workers handling similar weights in industry today.
-
- For his miracles of construction engineering,
Leedskalnin received attention not only from engineers and
technologists, but from the U.S. government, who paid him a visit
hoping to be enlightened. Leedskalnin received them gracefully, and
they left none the wiser. In 1952, falling ill and on his last legs,
Leedskalnin checked himself into the hospital and slipped away from
this life, taking his secret with him.
-
- If we assume that Leedskalnin and the ancient
pyramid builders were using similar techniques, it puts a whole
different light on the requirements in man hours necessary to
construct the Great Pyramid. Estimates for the number of workers that
built the Great Pyramid range between 20,000 and 100,000. Though it
should be noted that the precision to which Leedskalnin worked his
coral was not the same as that worked on the pyramid stone, based on
the abilities of this one man, quarrying and erecting a total of 1,100
tons of rock over a time span of 28 years, the 5,273,834 tons of stone
built into the Great Pyramid could have been quarried and put in place
by only 4,794 workers. Figure in the efficiencies gained from working
in a team, the division of labor, and we can reduce the number of
workers and/or shorten the time needed to do it. Let's not forget Mr.
Merle Booker (deceased) of the Indiana USA Limestone Institute, who
prepared an estimate for the delivery of enough limestone to build a
Great Pyramid. Using the same criteria, with respect to size and
quantity, as the ancient pyramid builders, but using modern equipment,
his estimate included tripling the average output of all 33 Indiana
limestone quarries. The estimate did not factor in any equipment
failures, labor disputes or acts-of-God. He estimated that twenty
seven years after the order was placed, the last stone would have been
delivered!
-
- I first visited Coral Castle in 1982. It soon became
clear to me that Ed's claim was accurate. He did indeed know the
secrets of the ancient Egyptians. I returned to Homestead again in
April 1995 to refresh my mind and, specifically, to closely examine a
device which, in 1992, fueled a discussion between myself and an
engineer colleague, Steven Defenbaugh, resulting in a speculation as
to the methods Leedskalnin was using.
-
- Leedskalnin took issue with modern science's
understanding of nature. He flatly states that they are wrong. His
concept of nature is simple. All matter consists of individual magnets
and it is the movement of these magnets within materials and through
space that produces measurable phenomena, i.e., magnetism and
electricity.
-
- Whether Leedskalnin was right or wrong in his
assertions, from his simple premise he was able to devise a means to
single-handedly elevate and maneuver large weights which would be
impossible using conventional methods. There is speculation that he
was employing electromagnetism to eliminate or reduce the
gravitational pull of the earth. These speculations are entertained by
some and scoffed at by others, who have feet which are firmly planted
in the real world.
-
- While at Coral Castle, I commented to a lady
standing in Leedskalnin's workshop that it was quite a feat he had
performed, and asked if she had any idea how he had done it. Fixing me
with a measured look, she stated, through the application of physics
and mechanics such work can be done. Somehow sensing my esoteric bent,
she commented that Thor Heyedahl had dispatched wild speculation about
how the huge stone statues on Easter Island were put in place when he
reenacted the work by carving, moving, and erecting one.
-
- Being alone, and wanting a photograph taken
of myself in Leedskalnin's workshop, I didn't want to be
argumentative. Smiling, I handed her the camera and didn't point out
that Heyerdahl, unlike Leedskalnin, had an ample supply of willing and
healthy natives, therefore sufficient man power to satisfy the
physical requirements for conventionally moving such large weights,
even on rollers, and cantilevering them into an upright position. He
was an energetic man, but, using these methods, Heyerdahl couldn't
have done it alone. Moreover, Heyerdahl merely demonstrated that the
job can be done using one particular method. Anyone who has worked in
manufacturing knows that there are many ways of doing things. To
devise a means to perform a given work and present it as the only way
that such work could be done gives little credit to those who either
a.) might know a better way, or b.) might look for a better method,
and succeed in finding one.
-
- When analyzing ancient engineering feats, and faced
with explaining technically difficult tasks, Egyptologists and
archaeologists typically throw in more time and more people using
primitive, simple tools and manpower. Unlike conventional arguments
regarding ancient civilizations, in the case of Ed Leedskalnin, we
cannot impose the view that the work was done employing masses of
people, for it is well documented that Leedskalnin worked
alone.
-
- Egyptologists claim to know how the Great Pyramid
was built. To prove it, they built a small pyramid consisting of
stones no heavier than 2-1/2 tons that were hefted into place using a
gang of workers, straining on ropes. (See This Old Pyramid, NOVA with
Mark Lehner and company.) Leedskalnin claimed to know how the Great
Pyramid was built, and to prove it he moved a 30-ton and other
monolithic blocks of coral to build his castle. It's too bad the
cameras weren't on Leedskalnin as they were on Lehner and company. I
believe that Leedskalnin's feat would be more descriptive of the
pyramid builders methods than Lehner's.
-
- What follows is speculation that attempts to follow
Leedskalnin's basic premise regarding the nature of electricity and
magnetism to a conclusion that has some semblance of logic. The
speculation follows some basic rules for brainstorming. There's no
such thing as a stupid idea.
-
- What we have been taught about the subject may not
necessarily apply when seeking and, hopefully, finding a real
solution.
-
- A paradigm shift in my perception of anti-gravity
occurred when Defenbaugh and I were discussing the subject with Judd
Peck, the CEO of the company for which we both work. Peck asked the
simple question What is anti-gravity? In an attempt to describe
anti-gravity I had to say A means by which objects can be lifted,
overcoming the gravitational pull of the earth. It then occurred to me
that we were already applying anti-gravitational techniques in our
everyday life. When we get out of bed in the morning we employ
anti-gravity. An airplane, rocket, fork-lift truck and an elevator are
technologies devised to overcome the effects of gravity. Even a car
rolling along on its wheels is an anti-gravity device. Without the
wheels and a propulsion system, it would be just dead weight.
-
- I realized that I had been laboring under the
assumption that, in order to create an anti-gravity device, gravity
should be a known and understood phenomenon and, through the
application of technology, out-of-phase gravity waves can be created
in such a manner to neutralize it. The nature of gravity still eludes
us, as well as the production of interference gravity waves.
-
- Perhaps this concept is too complicated!
-
- What if there's no such thing as gravity? And
the natural forces we already know about are sufficient to explain the
noted phenomena we have labeled as gravity? If, as Leedskalnin claims,
all matter consists of individual magnets, wouldn't the known
properties of a magnet be sufficient? We know that like poles repel
and unlike poles attract. We also know that we can suspend one magnet
above another as long as we don't allow either of them to flip over so
that the opposite poles attract each other. Magnets seek to attract
and, left to themselves, will align their opposite poles to each
other. Consider the magnet that is made to suspend above the other. A
mag-lev train is a good example of an antigravity device.
-
- If a large magnet is suspended over a smaller
magnet, depending on the ratio between them, the distance between the
magnets would be diminished to the point that the smaller magnet
wouldn't be able to exert enough force to elevate it. The earth, being
the largest magnet, issues forth streams of magnetic energy which
follow lines of force that have been noted for centuries. If we
assume, as Leedskalnin did, that all objects consist of individual
magnets, we can also assume that an attraction exists between these
objects due to the inherent nature of a magnet seeking to align an
opposite pole to another. Perhaps Leedskalnin's means of working with
the Earth's gravitational pull was nothing more complicated than
devising a means by which the alignment of magnetic elements within
his coral blocks was adjusted to face the streams of individual
magnets he claims are issuing forth from the Earth with a like
repelling pole.
-
- A known method for creating magnetism in an iron bar
is to align the bar with the Earth's magnetic field and strike the bar
with a hammer. This vibrates the elements in the bar and allows them
to be influenced by the magnetic field they are in. The result is that
when the vibration stops, a significant number of the atoms have
aligned themselves within this magnetic field.
-
- Was this the method that Leedskalnin was using? It's
a simple concept, but looking at the devices in Leedskalnin's
workshop, I can easily imagine the application of vibration and
electromagnetism. His fly-wheel for creating electricity remains
motionless, for the most part, until inquisitive tourists like me come
along and give it a spin. After a few revolutions, I realized that
something was missing. The narrative I had heard, while browsing
around the castle, described Leedskalnin as using this device to
create electricity to power his electric light bulbs. It was claimed
that Leedskalnin didn't have electricity, but I couldn't imagine this
device being a useful and continuing source of power, using only
Leedskalnin's right arm to turn the wheel. On closer examination of
this piece, I found that the whole assembly was actually an old
4-cylinder crank case. His flywheel was mounted on the front end of
the crankshaft and consisted of bar magnets that were sandwiched
between two plates, the upper plate being a ring gear. Giving it
weight and solidifying the entire assembly, Leedskalnin had encased
the bar magnets with cement. It then occurred to me that the photo of
Leedskalnin with his hand on the crank handle, which is attached to
the end of the shaft, may not accurately represent his entire
operation. It is possible that Leedskalnin was using the crank handle
to start a reciprocating engine, now missing, which attached to one of
the throws on the crankshaft. He would then be able to walk away and
leave his flywheel running.
-
- I was now mystified. I had developed a notion that
the bars attached to the flywheel were actually being used to develop
vibration in the piece Leedskalnin was trying to lift. This idea
didn't make sense after looking at the type of material, size and
weight of the entire assembly. The crankcase was firmly attached to
the coral block in his workshop, and even if it wasn't attached, it
would be quite a feat to keep moving it about. There was one factor I
needed to check out, though, before I headed back to Illinois. I had
tested the bar magnet with a pocket knife. The knife was attracted to
each bar. I needed to know, conclusively, the arrangement of the poles
in the wheel, to see, indeed, whether the assembly was capable of
creating electricity.
-
- Leaving the workshop and absorbing the penetrating
rays of the Florida sunshine, I headed for the nearest strip mall to
look for a hardware store so that I could buy a bar magnet. North on
Route1 I found a Radio Shack. They had just what I needed, and for
only $1.75. Feeling rather pleased, I swung back onto Route 1 and
returned to Coral Castle.
-
- Once there, I headed back into Leedskalnin's
workshop and put the magnet to the test. I held the magnet a short
distance away from the spokes of the flywheel while giving it a spin.
Sure enough, I found out what I had come for. The magnet pushed and
pulled in my grasp as the wheel rotated. Looking around the room, I
gazed at a jumble of various devices, lying, hanging and leaning about
the room. There were radio tuners, bottles with copper wire wrapped
around them, spools of copper wire and other various and sundry
plastic and metal pieces that looked like they had fallen out of an
old radio set.
-
- Leedskalnin's workshop also contained chains, blocks
and tackle and other items that one might find lying around a
junkyard. Some items are missing, though. Photographs of Leedskalnin
at work show three tripods, made of telephone poles, that have boxes
attached to the top. These objects, however, are not to be found at
Coral Castle. What is striking here, is that the block of coral being
moved is seen off to the side of the tripod. Perhaps Leedskalnin had
moved the tripod after raising the block out of the bedrock. Though
another interesting observation is that the block and tackle that can
be found inside his workshop are nowhere to be seen in this
photograph. There are spools of copper wire in his workshop, and there
were also two wrappings of copper wire. One was round copper and the
other flat copper. In a narrative that visitors can hear at various
recording stations around the compound, it is stated that at one time
Leedskalnin had a grid of copper wire suspended in the air. Looking at
the photograph, again, one can see that there is a cable draped around
the tripod and running down to the ground. Perhaps the arrangement of
tripods was more related to the suspension of his copper grid than the
suspension of block and tackle.
-
- I have no doubt that Leedskalnin told the truth when
he said he knew the secrets of the ancient Egyptians. Unlike those who
have sought publicity for their own inadequate, though politically
correct, theories, he proved it by his actions. I believe, also, that
these techniques can be rediscovered and put to use for the benefit of
mankind. Edward Leedskalnin, right or wrong, had a little bit of a
problem with trust. This modus operandi was not unusual for a
craftsman of his day. Proprietary techniques without patent disclosure
assure continued employment and, therefore, it was perfectly normal
that he would protect his secret from prying eyes that might steal and
profit from it. I believe there are enough pieces there to put
together and replicate his technique. It's been done once (sorry,
twice), and I am sure that it can be done again!
-
- Copyright © 1996-1999 Atlantis Rising. All Rights
Reserved
- 800-228-8381
- info@atlantisrising.com
|